Data link connector (OBD2): Difference between revisions
From OpenGK
No edit summary |
No edit summary |
||
| Line 48: | Line 48: | ||
(ISO 9141-2 &/ KWP2000) | (ISO 9141-2 &/ KWP2000) | ||
! style="background-color: yellow" |15 | ! style="background-color: yellow" |15 | ||
|''' | |'''L-Line'''<br>L-line (ISO 9141-2 &/ KWP2000) | ||
in Hyundai diagrams it's called DCT | in Hyundai diagrams it's called DCT | ||
Revision as of 07:48, 15 September 2023
Location
OBD2 port on the Tiburon is hidden behind the fusebox cover located right under the steering wheel.
Pinout
 |
THIS PINOUT IS OF THE HARNESS SIDE FEMALE CONNECTOR, AS IT'S SUPPOSED TO BE! OEM wiring diagrams reference male OBD2 plug instead. Assigned pin numbers will be mirrored between OEM's and diagram below. |
| 1 | 9 | ||
|---|---|---|---|
| 2 | Bus positive Line | 10 | Bus negative Line |
| 3 | Vehicle Speed sensor Going directly into pin 3 of vehicle's speed sensor |
11 | |
| 4 | Chassis ground | 12 | Airbag
Goes into pin 16 of BCM's BCM-IM connector |
| 5 | Signal ground ("Sensor ground") | 13 | |
| 6 | CAN high (ISO 15765-4 and SAE J2284) |
14 | CAN low (ISO 15765-4 and SAE J2284) |
| 7 | K-line (ISO 9141-2 &/ KWP2000) |
15 | L-Line L-line (ISO 9141-2 &/ KWP2000) in Hyundai diagrams it's called DCT and it's routed to BCM's "V-PUP" pin. |
| 8 | ABS/ESP Goes directly into ABS/ESP module and the "ESC AIR BLEEDING CONNECTOR" (if equipped with traction control) |
16 | Battery voltage ("Memory Power") +12 Volt |
For more CAN information, see SIMK43 CAN Bus
