Siemens 5WY19 PCB Components: Difference between revisions
No edit summary |
|||
| Line 3: | Line 3: | ||
==1. Infineon C167CS-LM CPU== | ==1. Infineon C167CS-LM CPU== | ||
16-Bit Single-Chip Microcontroller C166 Family | 16-Bit Single-Chip Microcontroller C166 Family | ||
25 Mhz Operating Frequency | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 11: | Line 13: | ||
|} | |} | ||
==2. AMD AM29F400BB Flash== | ==2. AMD AM29F400BB Flash== | ||
4 Megabit (512 K x 8-Bit/256 K x 16-Bit) | |||
CMOS 5.0 Volt-only Boot Sector Flash Memory | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 98: | Line 102: | ||
ATM46C3 966781 | ATM46C3 966781 | ||
|} | |} | ||
==11. Nexperia 74HC32D== | ==11. Nexperia 74HC32D (NXP)== | ||
The 74HC32D is a quad 2-input OR gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. | The 74HC32D is a quad 2-input OR gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 107: | Line 111: | ||
UnN0451D | UnN0451D | ||
|} | |} | ||
==12. Nexperia 74HC08D== | ==12. Nexperia 74HC08D (NXP)== | ||
The 74HC08D is a quad 2-input AND gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. | The 74HC08D is a quad 2-input AND gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 134: | Line 138: | ||
507 MYS | 507 MYS | ||
|} | |} | ||
==15. | ==15. Nexperia (NXP) 74HCT574D - SRAM== | ||
The 74HC574D is a high speed CMOS OCTAL FLIP-FLOP with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology. | The 74HC574D is a high speed CMOS OCTAL FLIP-FLOP with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology. | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 143: | Line 147: | ||
UnG0450G | UnG0450G | ||
|} | |} | ||
== 16. Nexperia (NXP) A82C250 - CAN Bus == | |||
{| class="wikitable" | |||
|- | |||
!Chip Markings | |||
|- | |||
|4R0R8 | |||
n6504 | |||
|} | |||
The PC A82C250 is the interface between a CAN protocol controller and the physical bus. | |||
The device provides differential transmit capability to the bus and differential receive capability to the CAN controller. | |||
- Fully compatible with the “ISO 11898” standard | |||
- High speed (up to 1 MBd) | |||
=Back Side= | =Back Side= | ||
[[File:5WY1900-Back.jpg|thumb|1166x1166px]] | [[File:5WY1900-Back.jpg|thumb|1166x1166px]] | ||
Revision as of 14:38, 12 August 2023
Front Side
1. Infineon C167CS-LM CPU
16-Bit Single-Chip Microcontroller C166 Family
25 Mhz Operating Frequency
| Chip Markings |
|---|
| Infineon
SAK-C167CS-LM |
2. AMD AM29F400BB Flash
4 Megabit (512 K x 8-Bit/256 K x 16-Bit)
CMOS 5.0 Volt-only Boot Sector Flash Memory
| Chip Markings |
|---|
| AM29F400BB
-55SEO 0504GBA N |
3. Crystal
Generic 8.000000MHz Crystal
| Chip Markings |
|---|
| 0502 |
4. ST ATM38E-808035
Octal Channel Low-Side Switch.
| Chip Markings |
|---|
| 446776
8995L0453 |
5. Motorola TY94085DH
The TY94085DH is a 20-pin SOP (Small Outline Package) integrated circuit from Motorola.
It is used in a variety of applications such as motor control, power management, and data acquisition.
| Chip Markings |
|---|
| ATM37 1.1
94.67.13 KBK0502 |
6. Motorola TY94085DH
The TY94085DH is a 20-pin SOP (Small Outline Package) integrated circuit from Motorola.
It is used in a variety of applications such as motor control, power management, and data acquisition.
| Chip Markings |
|---|
| ATM37 1.1
94.67.13 KBK0502 |
7. OnSemi EcoSpark Ignition IGBT
500 mJ, 360 V, N−Channel Ignition IGBT
| Chip Markings |
|---|
| N419AF V5036S |
8. OnSemi EcoSpark Ignition IGBT
500 mJ, 360 V, N−Channel Ignition IGBT
| Chip Markings |
|---|
| N419AF V5036S |
9. Texas Instruments 51DLEKT (Knock Sensor Interface)
The TPIC8101 is a dual-channel signal processing IC for detection of premature detonation in combustion engine. The two sensor channels are selectable through the SPI bus.
| Chip Markings |
|---|
| TP1C8101DW |
10. Amis ATM46C3
| Chip Markings |
|---|
| Siemens
0504TAK SDIA ATM46C3 966781 |
11. Nexperia 74HC32D (NXP)
The 74HC32D is a quad 2-input OR gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
| Chip Markings |
|---|
| AP052 07
UnN0451D |
12. Nexperia 74HC08D (NXP)
The 74HC08D is a quad 2-input AND gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
| Chip Markings |
|---|
| AP236 14
UnN0452E |
13. Infineon A2C36648
| Chip Markings |
|---|
| 0502
ATIC17 E1 |
14. ST ATM39B-556757
| Chip Markings |
|---|
| 990MT VB 99
507 MYS |
15. Nexperia (NXP) 74HCT574D - SRAM
The 74HC574D is a high speed CMOS OCTAL FLIP-FLOP with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology.
| Chip Markings |
|---|
| AO192 10
UnG0450G |
16. Nexperia (NXP) A82C250 - CAN Bus
| Chip Markings |
|---|
| 4R0R8
n6504 |
The PC A82C250 is the interface between a CAN protocol controller and the physical bus.
The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.
- Fully compatible with the “ISO 11898” standard
- High speed (up to 1 MBd)
Back Side
