Camshaft Specifications: Difference between revisions
From OpenGK
mNo edit summary |
mNo edit summary |
||
| Line 100: | Line 100: | ||
| 11º ATDC | | 11º ATDC | ||
|N/A Stage 2 can also be used for F/I | |N/A Stage 2 can also be used for F/I | ||
|- | |||
|Crower | |||
|Y | |||
|UNKNOWN | |||
|.399 | |||
|264° Adv. | |||
198° | |||
@0.050" | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
|Still gathering details on this | |||
custom grind. | |||
|- | |- | ||
|NGM/Crane | |NGM/Crane | ||
Revision as of 22:32, 12 April 2022
| Manufacturer | Regrind? | Part # | Lift | Duration | Separation | Overlap | In Open | In Close | Ex Open | Ex Close | Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| OEM | N | .316 | 232° Adv. | 110° | 14° | 6° BTDC | 46° ABDC | 44° BBDC | 8° ATDC | ||
| Colt | Y | Tri-Flow | In1 .365
In2 .355 Ex .365 |
218° @0.050"
210° @0.050" 218° @0.050" |
Tri-Flow grinds staggered intake
profiles to generate a swirl. | ||||||
| Crower | Y | E64012 | .340 | 210° @0.050" | 110° | 10° | 1° BTDC | 31° ABDC | 39° BBDC | 9° ATDC | N/A Stage 1 |
| Crower | Y | F5782
F2418 |
.349 | 210° @0.050" | 110° | 10° | 1º BTDC | 31º ABDC | 39º BBDC | 9º ATDC | N/A Stage 2 alternative |
| Crower | Y | F12413
F7589 |
.351 | 210° @0.050" | 110° | 10° | 1° BTDC | 31° ABDC | 39° BBDC | 9° ATDC | N/A Stage 2 alternative |
| Crower | Y | E65701 | .349 | 214° @0.050" | 114° | 14° | 3º BTDC | 37º ABDC | 45º BBDC | 11º ATDC | N/A Stage 2 can also be used for F/I |
| Crower | Y | UNKNOWN | .399 | 264° Adv.
198° @0.050" |
Still gathering details on this
custom grind. | ||||||
| NGM/Crane | N | STG 1 | .341 | 202º @0.050 | 110º | N/A Stage 1 | |||||
| NGM/Crane | N | STG 2 | .370 | 216º @0.050 | 117º | F/I Stage 2 | |||||
| PROSS | N | HiCam
9.2mm |
.362 to .368 | 260º Adv. | Unknown | ||||||
| PROSS | N | HiCam
10.7mm |
.421 to .428 | 270º Adv. | Unknown |
