Siemens 5WY19 PCB Components: Difference between revisions
No edit summary |
m (Added github link and small preamble) |
||
| (12 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
= Front | <div style="width: 40%; float: right; display: flex; justify-content: right;">__TOC__</div> | ||
[ | |||
== | {{PCB Picture|side=front|labeled_filename=5WY1900-Front.jpg}}This page documents the '''SIMK43 (5WY19)''' ECU hardware. The goal is to make the ECU easier to understand, inspect, and work with by providing a clear reference for board connectivity, key circuits, and component placement. | ||
16-Bit Single-Chip Microcontroller C166 Family | |||
The full ECU electrical schematic and PCB files are maintained on GitHub and are the canonical source for the latest revisions, updates, and related notes: [https://github.com/OpenGK-org/ecu-reverse-engineering/tree/main/5wy19 https://github.com/OpenGK-org/ecu-reverse-engineering/tree/main] | |||
{{PCB Component|index=1|title=Infineon C167CS-LM CPU|name=Infineon C167CS-LM|description=16-Bit Single-Chip Microcontroller C166 Family. 25 Mhz Operating Frequency|package=P-MQFP-144-8|datasheet=Infineon-c167cs4r-ds-en.pdf}} | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 12: | Line 14: | ||
SAK-C167CS-LM | SAK-C167CS-LM | ||
|} | |} | ||
==2. AMD AM29F400BB Flash== | ==2. AMD AM29F400BB Flash== | ||
4 Megabit (512 K x 8-Bit/256 K x 16-Bit) | 4 Megabit (512 K x 8-Bit/256 K x 16-Bit) | ||
| Line 33: | Line 36: | ||
|0502 | |0502 | ||
|} | |} | ||
==4. ST ATM38E- | ==4. ST ATM38E-BD8035== | ||
Octal Channel Low-Side Switch. | Octal Channel Low-Side Switch. | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 92: | Line 95: | ||
|TP1C8101DW | |TP1C8101DW | ||
|} | |} | ||
==10. Amis ATM46C3== | ==10. Amis ATM46C3 (Siemens Rotax ECU Driver)== | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 120: | Line 123: | ||
UnN0452E | UnN0452E | ||
|} | |} | ||
==13. Infineon | ==13. Infineon A2C33648 (Triple Voltage Regulator)== | ||
The A2C33648 is a monolithic integrated very low-drop triple voltage regulator. | |||
The output supplies loads up to 450 mA and the additional tracked outputs can provide up to 50 mA and 100 mA. | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 129: | Line 134: | ||
ATIC17 E1 | ATIC17 E1 | ||
|} | |} | ||
==14. ST ATM39B-556757== | ==14. ST ATM39B-556757 (CMOS Gate)== | ||
The ATMEL ATM39B-556757 is a ST Microelectronics CMOS logic chip. It is a quad single gate device in a 20-Pin SOP package. Description: The ATM39B-556757 is a Quad Single Gate(QSG) with non-inverting logic. This device provides four independently controlled single gates with a power dissipation of 5.6mW per gate. The device is designed to operate with a supply voltage of 3V to 5.5V. Features: Low power consumption Maximum sink current of 8mA Maximum switching speed up to 16V/ns Low input capacitance High output drive current Latch-up protection ESD protection Applications: High-speed logic circuits Clock and data separators Programmable logic applications Logic switching applications Analog multiplexers/demultiplexers. | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 138: | Line 143: | ||
507 MYS | 507 MYS | ||
|} | |} | ||
==15. Nexperia (NXP) 74HCT574D | ==15. Nexperia (NXP) 74HCT574D== | ||
The 74HC574D is a high speed CMOS OCTAL FLIP-FLOP with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology. | The 74HC574D is a high speed CMOS OCTAL FLIP-FLOP with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology. This chip sit between the CPU and EEPROM. | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 164: | Line 169: | ||
- High speed (up to 1 MBd) | - High speed (up to 1 MBd) | ||
=Back | {{PCB Picture|side=back|original_filename=5WY1900-Back.jpg}} | ||
[[ | |||
[[index.php?title=Category:Siemens L4 2.0L]] | |||
[[index.php?title=Category:Siemens L4 2.0L PCB Layouts]] | |||
[[index.php?title=Category:PCB Layouts]] | |||
Latest revision as of 16:59, 5 February 2026
Front side

This page documents the SIMK43 (5WY19) ECU hardware. The goal is to make the ECU easier to understand, inspect, and work with by providing a clear reference for board connectivity, key circuits, and component placement.
The full ECU electrical schematic and PCB files are maintained on GitHub and are the canonical source for the latest revisions, updates, and related notes: https://github.com/OpenGK-org/ecu-reverse-engineering/tree/main
1. Infineon C167CS-LM CPU
| Name | Infineon C167CS-LM
|
|---|---|
| Description | 16-Bit Single-Chip Microcontroller C166 Family. 25 Mhz Operating Frequency
|
| Package | P-MQFP-144-8
|
| Datasheet | Infineon-c167cs4r-ds-en.pdf
|
| Chip Markings |
|---|
| Infineon
SAK-C167CS-LM |
2. AMD AM29F400BB Flash
4 Megabit (512 K x 8-Bit/256 K x 16-Bit)
CMOS 5.0 Volt-only Boot Sector Flash Memory
| Chip Markings |
|---|
| AM29F400BB
-55SEO 0504GBA N |
3. Crystal
Generic 8.000000MHz Crystal
| Chip Markings |
|---|
| 0502 |
4. ST ATM38E-BD8035
Octal Channel Low-Side Switch.
| Chip Markings |
|---|
| 446776
8995L0453 |
5. Motorola TY94085DH
The TY94085DH is a 20-pin SOP (Small Outline Package) integrated circuit from Motorola.
It is used in a variety of applications such as motor control, power management, and data acquisition.
| Chip Markings |
|---|
| ATM37 1.1
94.67.13 KBK0502 |
6. Motorola TY94085DH
The TY94085DH is a 20-pin SOP (Small Outline Package) integrated circuit from Motorola.
It is used in a variety of applications such as motor control, power management, and data acquisition.
| Chip Markings |
|---|
| ATM37 1.1
94.67.13 KBK0502 |
7. OnSemi EcoSpark Ignition IGBT
500 mJ, 360 V, N−Channel Ignition IGBT
| Chip Markings |
|---|
| N419AF V5036S |
8. OnSemi EcoSpark Ignition IGBT
500 mJ, 360 V, N−Channel Ignition IGBT
| Chip Markings |
|---|
| N419AF V5036S |
9. Texas Instruments 51DLEKT (Knock Sensor Interface)
The TPIC8101 is a dual-channel signal processing IC for detection of premature detonation in combustion engine. The two sensor channels are selectable through the SPI bus.
| Chip Markings |
|---|
| TP1C8101DW |
10. Amis ATM46C3 (Siemens Rotax ECU Driver)
| Chip Markings |
|---|
| Siemens
0504TAK SDIA ATM46C3 966781 |
11. Nexperia 74HC32D (NXP)
The 74HC32D is a quad 2-input OR gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
| Chip Markings |
|---|
| AP052 07
UnN0451D |
12. Nexperia 74HC08D (NXP)
The 74HC08D is a quad 2-input AND gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
| Chip Markings |
|---|
| AP236 14
UnN0452E |
13. Infineon A2C33648 (Triple Voltage Regulator)
The A2C33648 is a monolithic integrated very low-drop triple voltage regulator.
The output supplies loads up to 450 mA and the additional tracked outputs can provide up to 50 mA and 100 mA.
| Chip Markings |
|---|
| 0502
ATIC17 E1 |
14. ST ATM39B-556757 (CMOS Gate)
The ATMEL ATM39B-556757 is a ST Microelectronics CMOS logic chip. It is a quad single gate device in a 20-Pin SOP package. Description: The ATM39B-556757 is a Quad Single Gate(QSG) with non-inverting logic. This device provides four independently controlled single gates with a power dissipation of 5.6mW per gate. The device is designed to operate with a supply voltage of 3V to 5.5V. Features: Low power consumption Maximum sink current of 8mA Maximum switching speed up to 16V/ns Low input capacitance High output drive current Latch-up protection ESD protection Applications: High-speed logic circuits Clock and data separators Programmable logic applications Logic switching applications Analog multiplexers/demultiplexers.
| Chip Markings |
|---|
| 990MT VB 99
507 MYS |
15. Nexperia (NXP) 74HCT574D
The 74HC574D is a high speed CMOS OCTAL FLIP-FLOP with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology. This chip sit between the CPU and EEPROM.
| Chip Markings |
|---|
| AO192 10
UnG0450G |
16. Nexperia (NXP) A82C250 - CAN Bus
| Chip Markings |
|---|
| 4R0R8
n6504 |
The PC A82C250 is the interface between a CAN protocol controller and the physical bus.
The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.
- Fully compatible with the “ISO 11898” standard
- High speed (up to 1 MBd)
Back side

index.php?title=Category:Siemens L4 2.0L index.php?title=Category:Siemens L4 2.0L PCB Layouts index.php?title=Category:PCB Layouts
